Processing

every step applied, by run of casts

generated 2026-09-08 06:59 UTC

Cruise
odb26
Source
profiles_demo.nc
Casts
4
ctdcast
(1) Stage 1 — reading the raw file (2) Sea-Bird — before ctdcast (from the raw header) (3) Stage 2 — soak and deck

Every step applied to the casts in profiles_demo.nc, in the order they ran; # numbers the steps in that order through the page, so sorting by it restores the order after sorting by another column. A row covers the casts in its Casts column, which used the same setting; a step whose setting changed has one row per run of casts, and a step whose setting changed more than 5 times has a single varies cast to cast row with the range of its values. What a step did on one cast (values marked, scans flagged) is on that cast's page.

(1) Stage 1 — reading the raw file

#CastsStepProducerVersionSettingVariablesMatches referenceReference
1 011–129 read ctdcast stage 1 ctdcast 0.1.0 with SeaSenseLib 0.6.0 (SbeCnvReader); normalise (CNV → canonical names) —

(2) Sea-Bird — before ctdcast (from the raw header)

#CastsStepProducerVersionSettingVariablesMatches referenceReference
2 011–129 align SBE 11plus deck unit V 5.2 advance primary conductivity 0.073 s conductivity_1 ✓ 0.073 s — SBE manual p.85
3 011–129 align SBE 11plus deck unit V 5.2 advance secondary conductivity 0.073 s conductivity_2 ✓ 0.073 s — SBE manual p.85
4 011–129 datcnv SBE Data Processing 7.26.7.129 skipover=0 ox_hysteresis_correction=yes ox_tau_correction=yes all channels: raw→physical —
5 011–129 wildedit SBE Data Processing 7.26.7.129 pass1_nstd=2.0 pass2_nstd=20.0 npoint=100 pressure, ctd_temperature_1, conductivity_1, ctd_temperature_2, conductivity_2, ctd_altimeter, ctd_fluor, ctd_turbidity, longitude, latitude, sbe_oxygen_saturation_1, ctd_oxygen, sbe_oxygen_saturation_2 — SBE example 2/20/100 · GEOMAR 3/10/50 — SBE Data Processing example; ctdam wildedit_geomar default
6 011–129 wfilter SBE Data Processing 7.26.7.129 excl_bad_scans=yes median, 10 pressure, ctd_temperature_1, conductivity_1, ctd_temperature_2, conductivity_2, ctd_fluor, ctd_turbidity, sbe_oxygen_saturation_2 —
7 011–129 filter SBE Data Processing 7.26.7.129 filtered at 0.030 s ctd_altimeter, ctd_fluor, ctd_turbidity, longitude, latitude, sbe_oxygen_saturation_1, ctd_oxygen, sbe_oxygen_saturation_2 —
8 011–129 filter SBE Data Processing 7.26.7.129 filtered at 0.150 s pressure ✓ pressure 0.15 s — SBE manual p.100 (= 4 / scan-rate)
9 011–129 celltm SBE Data Processing 7.26.7.129 alpha=0.0300 tau=7.0000 conductivity_1 ✓ (α,τ)=(0.03,7) — SBE manual p.92 (TC duct, 3000-rpm pump)
10 011–129 celltm SBE Data Processing 7.26.7.129 alpha=0.0300 tau=7.0000 conductivity_2 ✓ (α,τ)=(0.03,7) — SBE manual p.92 (TC duct, 3000-rpm pump)
11 011–129 Derive SBE Data Processing 7.26.7.129 — 2 variables derived —
12 011–129 binavg SBE Data Processing 7.26.7.129 bintype=decibars binsize=1 all channels: binned —

(3) Stage 2 — soak and deck

#CastsStepProducerVersionSettingVariablesMatches referenceReference
13 011–129 trim (soak/deck) ctdcast stage 2 ctdcast 0.4.1 near_surface_dbar=10.0, search_seconds=20.0, deck_window_seconds=20.0, margin_dbar=0.5, max_deck_dbar=20.0 every variable with a _qc —