28 data variables · 11 sensors · 0 QC companions · 4 coordinates · 24 sensor linkage/channel (see Sensors)
| # | Variable | Dims | Type | Length | Units | Standard / long name | Min / Max | Attributes | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | N_PROF | N_PROF | int32 | 8 | — | Profile index (0-based sequential) | 0 / 7 | — | ||||
| 2 | latitude | N_PROF | float64 | 8 | degrees_north | latitudeLatitude | 65.58 / 65.86 | 1 attr
| ||||
| 3 | longitude | N_PROF | float64 | 8 | degrees_east | longitudeLongitude | -29.59 / -29.43 | 1 attr
| ||||
| 4 | pressure | pressure | float32 | 718 | dbar | sea_water_pressureSea water pressure | 1 / 718 | 2 attrs
|
Grouped by dimension; the per-group sample count is in each heading. Each row's Attributes cell expands to the full per-variable attribute set.
Amber Valid %: fewer valid values than samples. Amber Units: a floating-point variable with no units attribute (CF expects one).
| # | Variable | Type | Units | Standard / long name | Min / Max | Valid | Valid % | Attributes | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | cast_direction | string | — | Profile direction | — | 8 | 100.0 | 2 attrs
| ||||||
| 2 | cast_id | string | — | Cast identifier | — | 8 | 100.0 | 1 attr
| ||||||
| 3 | cast_number | int32 | — | original cast number from filename | 11 / 129 | 8 | 100.0 | — | ||||||
| 4 | cast_suffix | string | — | cast letter suffix from filename | — | 8 | 100.0 | 1 attr
| ||||||
| 5 | cast_type | string | — | downcast or upcast (deprecated alias for cast_direction) | — | 8 | 100.0 | 1 attr
| ||||||
| 6 | gebco_depth_m | float32 | m | GEBCO bathymetry depth at max-pressure position | — | 0 | 0.0 | 2 attrs
| ||||||
| 7 | max_pressure_dbar | float32 | dbar | Maximum pressure recorded during full cast | 307 / 718 | 8 | 100.0 | 1 attr
| ||||||
| 8 | preferred_pair | string | — | preferred-sensor choice (preferred_pair) per profile | — | 8 | 100.0 | 1 attr
| ||||||
| 9 | processing_record | string | — | processing steps applied to this profile's cast | — | 8 | 100.0 | 1 attr
| ||||||
| 10 | source_data_mode | string | — | OceanSITES data mode of the source cast for this profile | — | 8 | 100.0 | 1 attr
| ||||||
| 11 | source_file | string | — | source per-cast filename this profile was compiled from | — | 8 | 100.0 | 1 attr
| ||||||
| 12 | source_stage | int8 | — | processing stage of the source file for this profile | 3 / 3 | 8 | 100.0 | 3 attrs
| ||||||
| 13 | source_tracking_id | string | — | tracking_id of the per-cast file this profile was compiled from | — | 8 | 100.0 | 1 attr
| ||||||
| 14 | time_end | datetime | — | end time of cast direction | 2026-07-12 02:49:22.931 / 2026-07-22 10:01:51.533 | 8 | 100.0 | — | ||||||
| 15 | time_start | datetime | — | start time of cast direction | 2026-07-12 02:40:06.040 / 2026-07-22 09:43:02.025 | 8 | 100.0 | — |
Amber Valid %: fewer valid values than samples. Amber Units: a floating-point variable with no units attribute (CF expects one).
| # | Variable | Type | Units | Standard / long name | Min / Max | Valid | Valid % | Attributes | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | conductivity | float32 | mS cm-1 | sea_water_electrical_conductivityConductivity (preferred pair) | 27.89 / 36.75 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 2 | conductivity_1 | float32 | mS cm-1 | sea_water_electrical_conductivityConductivity (primary) | 27.89 / 36.76 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 3 | conductivity_2 | float32 | mS cm-1 | sea_water_electrical_conductivityConductivity (secondary) | 27.89 / 36.75 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 4 | ctd_altimeter | float32 | m | altitude_of_sea_floorAltimeter distance to seafloor | -9.99e-29 / 102.5 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 5 | ctd_fluor | float32 | mg m-3 | mass_concentration_of_chlorophyll_in_sea_waterChlorophyll fluorescence | 2.898 / 3.366 | 3,983 | 69.3 | 3 attrs
| ||||||||
| 6 | ctd_oxygen | float32 | umol kg-1 | moles_of_oxygen_per_unit_mass_in_sea_waterDissolved oxygen (preferred) | 236.9 / 344.7 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 7 | ctd_salinity | float32 | 1 | sea_water_practical_salinityPractical salinity (preferred pair) | 31.92 / 35.19 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 8 | ctd_salinity_1 | float32 | 1 | sea_water_practical_salinityPractical salinity (primary) | 31.92 / 35.19 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 9 | ctd_salinity_2 | float32 | 1 | sea_water_practical_salinityPractical salinity (secondary) | 31.92 / 35.19 | 3,998 | 69.6 | 3 attrs
| ||||||||
| 10 | ctd_temperature | float32 | degree_Celsius | sea_water_temperatureIn-situ temperature (preferred pair) | 0.1661 / 8.493 | 3,998 | 69.6 | 4 attrs
| ||||||||
| 11 | ctd_temperature_1 | float32 | degree_Celsius | sea_water_temperatureIn-situ temperature (primary) | 0.1661 / 8.499 | 3,998 | 69.6 | 4 attrs
| ||||||||
| 12 | ctd_temperature_2 | float32 | degree_Celsius | sea_water_temperatureIn-situ temperature (secondary) | 0.1682 / 8.493 | 3,998 | 69.6 | 4 attrs
| ||||||||
| 13 | ctd_turbidity | float32 | 1 | sea_water_turbidityTurbidity | 0.0072 / 0.6267 | 3,956 | 68.9 | 3 attrs
|
Samples flagged QARTOD suspect (3) or fail (4) are dropped before pressure binning. The denominator is the count of finite input samples before binning, so the percentage is not distorted by binning's own reduction in point count.
A variable's exclusions are not all its own: the whole-cast soak / on-deck trim flags the same pre-descent and post-recovery scans on every variable, so a variable can be excluded here without its own gross-range or spike test having raised anything.
| Variable | Excluded | Input samples | % excluded |
|---|---|---|---|
| conductivity | 20 | 4,022 | 0.50% |
| conductivity_1 | 20 | 4,022 | 0.50% |
| conductivity_2 | 20 | 4,022 | 0.50% |
| ctd_altimeter | 20 | 4,022 | 0.50% |
| ctd_fluor | 35 | 4,022 | 0.87% |
| ctd_oxygen | 20 | 4,022 | 0.50% |
| ctd_salinity | 20 | 4,022 | 0.50% |
| ctd_salinity_1 | 20 | 4,022 | 0.50% |
| ctd_salinity_2 | 20 | 4,022 | 0.50% |
| ctd_temperature | 20 | 4,022 | 0.50% |
| ctd_temperature_1 | 20 | 4,022 | 0.50% |
| ctd_temperature_2 | 20 | 4,022 | 0.50% |
| ctd_turbidity | 62 | 4,022 | 1.54% |
The file records its sensors in three families of variables:
SENSOR_<TYPE>_<SERIAL> — one dimensionless variable per physical device, e.g. SENSOR_CONDUCTIVITY_3120. It holds no data; its attributes are the device's provenance: model, maker, serial, calibration date, the datcnv slope/offset and the configuration block as recorded.sensor_<role> — per profile, the name of the SENSOR_* variable that filled that role, e.g. sensor_conductivity_2 = SENSOR_CONDUCTIVITY_3120. A change along the profiles is a sensor swap. Where a preferred pair or oxygen is declared, sensor_<role>_preferred names the device chosen for the plain composite.sensor_channel_<role> — per profile, the raw CNV acquisition channel that role's sensor was wired to (−1 where unused). A change with the same device is a re-cabling.Their tables, with the sensor configuration by cast, the preferred sensors and the device inventory built from them, are on the SBE sensors page.
Shown in the file's own write order, split into the canonical groups.
| Attribute | Type | Value |
|---|---|---|
| title | string | UNK CTD profiles — all casts, downcast + upcast |
| cruise | string | UNK |
| Attribute | File value | Computed | Diff |
|---|---|---|---|
| geospatial_lat_min | 65.58246 | 65.58 | 0 |
| geospatial_lat_max | 65.86038 | 65.86 | 0 |
| geospatial_lat_units | degrees_north | ||
| geospatial_lon_min | -29.58836 | -29.59 | 0 |
| geospatial_lon_max | -29.43282 | -29.43 | 0 |
| geospatial_lon_units | degrees_east | ||
| geospatial_vertical_min | 1.0 | 1 | 0 |
| geospatial_vertical_max | 718.0 | 718 | 0 |
| geospatial_vertical_units | dbar | ||
| geospatial_vertical_positive | down | ||
| time_coverage_start | 2026-07-12T02:40:06Z | 2026-07-12 02:40:06 | 0 s |
| time_coverage_end | 2026-07-22T10:01:51Z | 2026-07-22 10:01:51 | 0 s |
| time_coverage_duration | P10DT7H21M45S |
| Attribute | Type | Value |
|---|---|---|
| date_created | string | 2026-11-05T22:18:10Z |
| date_modified | string | 2026-11-05T22:18:10Z |
| tracking_id | string | 31e6eccd-edaf-4ccf-88fb-0f56332be5f7 |
| history | string | 2026-11-05T22:18:10Z ctdcast 0.4.1 create: file created by ctdcast (https://github.com/ocean-uhh/ctdcast) 2026-11-05T22:18:10Z ctdcast 0.4.1 profiles: compiled 4 casts; mean of raw samples per 1-dbar bin, pressure coordinate is the bin centre; excluded QARTOD flag 4 (fail) and 9 (missing) records (soak/deck, edits, gross-range/spike) before binning; suspect (3) kept |
| source | string | 4 per-cast netCDF files compiled by ctdcast from stageN/<stem>_stageN.nc (per-profile source_file records each name) |
| data_mode | string | P |
| data_mode_meaning | string | provisional |
| Conventions | string | CF-1.13, ACDD-1.3 |
| featureType | string | profile |
| cdm_data_type | string | Profile |
| pressure_units | string | dbar |
| pressure_spacing_dbar | int64 | 1 |