CT · SA · σ₀ profiles, station location, and T–S down-vs-up.
CT · SA · σ₀ vs pressure — downcast in colour, upcast in grey.
O₂ saturation · fluorescence · turbidity.
Coloured by O₂ saturation — downcast only.
N² and Turner angle — downcast only.
ladcp_bottomtrack — applicable but unavailable
QARTOD flags recorded by the pipeline, read back from the cast file: gross-range thresholds applied and the flag-count breakdown per variable.
| Variable | Test | Suspect range / threshold | Fail range / threshold |
|---|---|---|---|
| conductivity_* | gross-range | [0.0, 65.0] | [0.0, 75.0] |
| conductivity_* | spike | |Δ| > 2.0 | |Δ| > 5.0 |
| ctd_fluor | gross-range | – | [0.0, 50.0] |
| ctd_oxygen | gross-range | – | [0.0, 450.0] |
| ctd_oxygen | spike | |Δ| > 20.0 | – |
| ctd_salinity_* | gross-range | [2.0, 40.0] | [0.0, 40.0] |
| ctd_salinity_* | spike | |Δ| > 1.0 | |Δ| > 2.0 |
| ctd_temperature_* | gross-range | [-2.0, 35.0] | [-2.5, 40.0] |
| ctd_temperature_* | spike | |Δ| > 2.0 | |Δ| > 6.0 |
| ctd_turbidity | gross-range | – | [0.0, 50.0] |
| pressure | gross-range | [-0.5, 7000.0] | [-5.0, 7000.0] |
| pressure | spike | |Δ| > 10.0 | |Δ| > 50.0 |
Flag 4 (fail) combines two independent exclusions: this variable’s own gross-range and spike tests, and the whole-cast soak / on-deck trim, which flags the same pre-descent and post-recovery scans on every variable. A variable can therefore show flagged samples that its own thresholds did not raise.
| Variable | N | pass % | not eval % | suspect % | fail % | missing % | Distribution |
|---|---|---|---|---|---|---|---|
| conductivity_1 | 1,429 | 99.6 | – | – | 0.4 | – | |
| conductivity_2 | 1,429 | 99.6 | – | – | 0.4 | – | |
| conductivity | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_altimeter | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_fluor | 1,429 | 99.4 | – | – | 0.6 | – | |
| ctd_oxygen | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_salinity_1 | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_salinity_2 | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_salinity | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_temperature_1 | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_temperature_2 | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_temperature | 1,429 | 99.6 | – | – | 0.4 | – | |
| ctd_turbidity | 1,429 | 98.5 | – | – | 1.5 | – | |
| pressure | 1,429 | 100.0 | – | – | – | – | |
| sbe_density | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_depth | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_flag | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_oxygen_saturation_1 | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_oxygen_saturation_2 | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_speed_of_sound | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_timeJ | 1,429 | 99.6 | – | – | 0.4 | – | |
| sbe_timeS | 1,429 | 99.6 | – | – | 0.4 | – |
Amber row: a calibration was applied — the sensor's Slope ≠ 1 or Offset ≠ 0 (a drift/span correction); the departing value is in bold.
| Variable | Role | Ch | Device | Model | Cal date | Slope | Offset |
|---|---|---|---|---|---|---|---|
| ctd_temperature_1 | temperature_1 | 1 | SN 6435 | SBE 3plus | 2026-Feb-17 | 1.00000000 | 0.0000 |
| conductivity_1 | conductivity_1 | 2 | SN 4922 | SBE 4C | 2026-Feb-17 | 1.00000452 | 0.00000 |
| pressure | pressure | 3 | SN 0814 | Digiquartz | 2023-Feb-17 | 1.00004096 | 0.27440 |
| ctd_temperature_2, ctd_temperature | temperature_2 | 4 | SN 6000 | SBE 3plus | 2023-Apr-14 | 1.00000000 | 0.0000 |
| conductivity_2, conductivity | conductivity_2 | 5 | SN 3120 | SBE 4C | 2023-May-23 | 0.99993682 | 0.00000 |
| — | user_polynomial | 6 | SN UVP6 | UNK | 090726 | ||
| ctd_oxygen | oxygen_1 | 8 | SN 0707 | SBE 43 | 2025-Dec-10 | ||
| — | ph | 9 | SN 339 | SBE 18 | 2024-Feb-13 | ||
| — | transmissometer | 10 | SN 2033 | WET Labs C-Star | 2020-Apr-14 | ||
| ctd_turbidity | turbidity | 12 | SN 3508 | WET Labs ECO NTU | 2016-Apr-12 | ||
| ctd_fluor | fluorometer | 13 | SN FLNTURTD-3508 | WET Labs ECO FL | 2016-Apr-12 |
File identity read back from the cast file: cast, OceanSITES data mode, processing stage, and the tracking_id lineage to the source CNV.
| Property | Value |
|---|---|
| Cast | 129 |
| Data mode | P (provisional) |
| Processing stage | 1 |
| Source CNV | mixsed2_129.cnv |
| Tracking id | 42c71d25-d76b-4449-8664-f6ed01fd7f75 |
| Created | 2026-09-08T06:59:48.627084Z |
| Modified | 2026-09-08T06:59:48Z |
Min · max · valid count for every variable in the cast file on disk.
| Property | Value |
|---|---|
| Time coordinate source | NMEA time, header |
| Clock offset (NMEA − system) | -3.0 s |
| Variable | Type | Units | Standard / long name | Min / Max | Valid | Valid % | Attributes | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| conductivity (_qc) | float64 | mS cm-1 | sea_water_electrical_conductivity | 32.4 / 36.58 | 1,429 | 100.0 | 9 attrs
| ||||||||||||||||||||||
c0S/m →conductivity_1 (_qc) |
float64 | mS cm-1 | sea_water_electrical_conductivityConductivity | 32.39 / 36.58 | 1,429 | 100.0 | 11 attrs
| ||||||||||||||||||||||
c1S/m →conductivity_2 (_qc) |
float64 | mS cm-1 | sea_water_electrical_conductivityConductivity | 32.4 / 36.58 | 1,429 | 100.0 | 11 attrs
| ||||||||||||||||||||||
altM →ctd_altimeter (_qc) |
float64 | m | altitude_of_sea_floorAltimeter distance to seafloor | -9.99e-29 / 99.14 | 1,429 | 100.0 | 7 attrs
| ||||||||||||||||||||||
flECO-AFL →ctd_fluor (_qc) |
float64 | mg m-3 | mass_concentration_of_chlorophyll_in_sea_waterChlorophyll fluorescence | -9.99e-29 / 3.409 | 1,429 | 100.0 | 7 attrs
| ||||||||||||||||||||||
sbox0Mm/Kg →ctd_oxygen (_qc) |
float64 | umol kg-1 | moles_of_oxygen_per_unit_mass_in_sea_waterDissolved oxygen (preferred sensor) | 236.9 / 310.8 | 1,429 | 100.0 | 6 attrs
| ||||||||||||||||||||||
| ctd_salinity (_qc) | float64 | 1 | sea_water_salinity | 32.97 / 35.19 | 1,429 | 100.0 | 8 attrs
| ||||||||||||||||||||||
sal00 →ctd_salinity_1 (_qc) |
float64 | 1 | sea_water_salinitySalinity | 32.98 / 35.19 | 1,429 | 100.0 | 9 attrs
| ||||||||||||||||||||||
sal11 →ctd_salinity_2 (_qc) |
float64 | 1 | sea_water_salinitySalinity | 32.97 / 35.19 | 1,429 | 100.0 | 9 attrs
| ||||||||||||||||||||||
| ctd_temperature (_qc) | float64 | degree_Celsius | sea_water_temperature | 3.935 / 8.349 | 1,429 | 100.0 | 9 attrs
| ||||||||||||||||||||||
t090C →ctd_temperature_1 (_qc) |
float64 | degree_Celsius | sea_water_temperatureTemperature | 3.936 / 8.349 | 1,429 | 100.0 | 10 attrs
| ||||||||||||||||||||||
t190C →ctd_temperature_2 (_qc) |
float64 | degree_Celsius | sea_water_temperatureTemperature | 3.935 / 8.349 | 1,429 | 100.0 | 10 attrs
| ||||||||||||||||||||||
turbWETntu0 →ctd_turbidity (_qc) |
float64 | 1 | sea_water_turbidityTurbidity | -9.99e-29 / 0.6267 | 1,429 | 100.0 | 10 attrs
| ||||||||||||||||||||||
prDM →pressure (_qc) |
float64 | dbar | sea_water_pressurePressure | 1 / 718 | 1,429 | 100.0 | 10 attrs
| ||||||||||||||||||||||
| sbe_density (_qc) | float64 | kg m-3 | sea_water_densitySea Water Density | 1026 / 1031 | 1,429 | 100.0 | 8 attrs
| ||||||||||||||||||||||
| sbe_depth (_qc) | float64 | m | depthDepth | -709.7 / -0.9902 | 1,429 | 100.0 | 8 attrs
| ||||||||||||||||||||||
flag →sbe_flag (_qc) |
float64 | 1 | SeaBird per-scan processing flag | 0 / 0 | 1,429 | 100.0 | 4 attrs
| ||||||||||||||||||||||
sbeox0PS →sbe_oxygen_saturation_1 (_qc) |
float64 | percent | volume_fraction_of_oxygen_in_sea_waterOxygen | 77.89 / 101.8 | 1,429 | 100.0 | 7 attrs
| ||||||||||||||||||||||
sbeox0V →sbe_oxygen_saturation_2 (_qc) |
float64 | percent | volume_fraction_of_oxygen_in_sea_waterOxygen | -9.99e-29 / 2.336 | 1,429 | 100.0 | 7 attrs
| ||||||||||||||||||||||
| sbe_speed_of_sound (_qc) | float64 | m s-1 | speed_of_sound_in_sea_waterSpeed of Sound in Sea Water | 1471 / 1484 | 1,429 | 100.0 | 6 attrs
| ||||||||||||||||||||||
timeJ →sbe_timeJ (_qc) |
float64 | day | SeaBird elapsed time, Julian days since start of year | 203.4 / 203.4 | 1,429 | 100.0 | 4 attrs
| ||||||||||||||||||||||
timeS →sbe_timeS (_qc) |
float64 | s | SeaBird elapsed time since start of cast | 10.6 / 2355 | 1,429 | 100.0 | 4 attrs
|
What the SBE deck unit and Sea-Bird Data Processing did to this cast before ctdcast read it, recovered from the raw header.
The # column is the order in which the corrections were applied; sort by any column, then by # to return to that order.
| # | Step | Producer | Version | Parameters | Variables | Matches reference |
|---|---|---|---|---|---|---|
| 1 | align | SBE 11plus deck unit | V 5.2 | advance primary conductivity 0.073 s | conductivity_1 | ✓ |
| 2 | align | SBE 11plus deck unit | V 5.2 | advance secondary conductivity 0.073 s | conductivity_2 | ✓ |
| 3 | datcnv | SBE Data Processing | 7.26.7.129 | skipover=0 ox_hysteresis_correction=yes ox_tau_correction=yes | all channels: raw→physical | – |
| 4 | wildedit | SBE Data Processing | 7.26.7.129 | pass1_nstd=2.0 pass2_nstd=20.0 npoint=100 | channelspressure, ctd_temperature_1, conductivity_1, ctd_temperature_2, conductivity_2, ctd_altimeter, ctd_fluor, ctd_turbidity, longitude, latitude, sbe_oxygen_saturation_1, ctd_oxygen, sbe_oxygen_saturation_2 | – |
| 5 | wfilter | SBE Data Processing | 7.26.7.129 | excl_bad_scans=yes median, 10 | channelspressure, ctd_temperature_1, conductivity_1, ctd_temperature_2, conductivity_2, ctd_fluor, ctd_turbidity, sbe_oxygen_saturation_2 | – |
| 6 | filter | SBE Data Processing | 7.26.7.129 | filtered at 0.030 s | channelsctd_altimeter, ctd_fluor, ctd_turbidity, longitude, latitude, sbe_oxygen_saturation_1, ctd_oxygen, sbe_oxygen_saturation_2 | – |
| 7 | filter | SBE Data Processing | 7.26.7.129 | filtered at 0.150 s | pressure | ✓ |
| 8 | celltm | SBE Data Processing | 7.26.7.129 | alpha=0.0300 tau=7.0000 | conductivity_1 | ✓ |
| 9 | celltm | SBE Data Processing | 7.26.7.129 | alpha=0.0300 tau=7.0000 | conductivity_2 | ✓ |
| 10 | Derive | SBE Data Processing | 7.26.7.129 | 2 variables derived | – | |
| 11 | binavg | SBE Data Processing | 7.26.7.129 | bintype=decibars binsize=1 | all channels: binned | – |
Reference values: align 0.073 s — SBE manual p.85; filter pressure 0.15 s — SBE manual p.100 (= 4 / scan-rate); celltm (α,τ)=(0.03,7) — SBE manual p.92 (TC duct, 3000-rpm pump).
Per-sensor calibration state (drift Slope/Offset) and the device inventory are in the Sensors appendix.
The steps before ctdcast are recovered from the raw Sea-Bird header on the cast file; the full verbatim blocks are kept in the sbe_acquisition and sbe_processing attributes.